News

  • Exhibition Information
  • New Product Information and News Releases

New Product Information and News Releases

News

INFORMATION

Minor Changes for Portable mixer and Multi A mixer

Portable mixer and Multi A mixer have been made some minor changes.
Please check the Product Information.

News

INFORMATION

Effect of the earthquake in Tohoku

*There is no human damage among our staff.
*The production facilities are go.
*When the rolling blackouts affects the productivity of our Tokyo factory, Osaka factory makes it up.

News

INFORMATION

Year-end and New Year holidays

Satake takes the year-end and New Year holidays from December29, 2010 to January4, 2011.
We apologize for the inconvenience.

News

Product Information has been updated

The pages of Product Information have been updated.

Satake Super Shear Mixers (high performance dispersion mixers)
Satake Portable Mixer (PSE Type)

News

The 3rd Asian Conference of Mixing

ACOM 2010 will be held in Jeju, Korea on October 19-22

Satake will present 2 papers at the meeting.

News

23rd INTERPHEX JAPAN

Thank you for coming!

The exhibition ended without problems.
We really appreciate lots of visits to our booth from you.

News

Annual Meeting of THE JAPAN SOCIETY FOR BIOSCIENCE, BIOTECHNOLOGY, and AGROCHEMISTRY 2010

Satake V-MOVE Mixer is going to be exhibited.

We are going to exhibit and explain a new mixer of vertical motion named Satake V-Move Mixer.
It produces an extreme low shearing force.

Date: March 28-30, 2010
Site: Tokyo University (2nd gymnasium of Komaba campus, and others)
Organizer: Planning committee for Annual meeting of JSBBA 2010

We exhibit and explain Satake V-Move Mixer at the booth of Mitsuwa Frontech Corp.
It is a new vertical motion mixer specialized for Aseptic, GMP,HACCP, and Fine chemical. It enables you to mix under the condition of complete enclosure, slid less, seal free, and non-contamination.

News

INFORMATION

Catalogue updated

The catalogues of some mixers have been updated.
Portable Mixer
Supermag Mixer
Super Mix Series
Mixing Torque Meter
General catalogue

News

INFORMATION

Catalogue updated

The catalogue of Multi S Mixer S3-S9 series has been updated.
Please check it out.

News

INFORMATION

Year-end through New Year holidays

Satake takes year-end through New Year holidays from December 26 to January 4.
We apologize for the inconvenience.

News

INCHEM TOKYO 2009

Thank you for coming!

The exhibition ended without problems.
We really appreciate lots of visits to our booth from you.

News

Mixing Seminar in Osaka by ANSYS JAPAN

Information of a mixing seminar.

On November 27 (Fri), a seminar of mixing for those who are interested in rheological analyses in vessels will be held at ANSYS. And we will have a presentation of impellers' effects and their monitored results there.

Mixing Seminar.
Date: November 27, 2009
Venue: Conference room B in Osaka Shin-Umeda Training Center
Programs:
1. Phenomena and theory of mixing
-What is a mixer?
-What is mixing?
-Advection and diffusion
-Laminar and turbulent flow
-Scale-up
-Principle of CFD
2. Effects of impellers and examples of monitored results
-Sorts of impellers and their appropriate uses
-Measurement of flow patterns
-Comparison with analysis results
-MIXSIM library
3. Examples of analyses and demonstration by ANSYS
-Requirement for analyses
-What we can gain from analyses
-The use of FLUENT
-Examples of measurement
Capacity: The first 50 people
Expense: Free (Sorry, but lunch will not be offered)
Period: 13:30-17:00 (Reception will start at 13:10)
If you are interested in mixing, please participate in this seminar.
Please accesss to the website of ANSYS JAPAN and apply for it.

News

POWDER TECHNOLOGY EXHIBITION OSAKA 2009

Thank you for coming!.

The exhibition ended without problems.
We really appreciate lots of visits to our booth from you.

News

INCHEM TOKYO 2009

Additional information of INCHEM TOKYO 2009.

CFD software of ANSYS JAPAN will be exhibited at scale-up zone of our booth.
Thermofluid analyzing software "ANSYS (FLUENT)12", and others.
Mixing analyzing software "MixSim"
Satake's high-performing impellers "Super-Mix Series" are organized as a library.

News

INCHEM TOKYO 2009

Information of INCHEM TOKYO 2009.

Period: November 18-20, 2009
Venue: Tokyo Big Sight
Exhibited Products: Satake Supermag Mixer
Satake Super Shear Mixers
Satake Mixing Torque Meter
Satake Portable Mixer

News

Adaption to the CE marking
Multi S Mixers (non explosion-proof type and gland packing type of S0-S9 series) have been adapted to the Machinery Directives of CE marking which corresponds to PL Law in Europe.

News

Our homepage has been remodeled.
Japanese, English and Chinese homepages have been updated or newly installed.

New productPatent pending

Satake Mixing Torque Meter ST-3000

This larger mixer with a high-precision torque meter for experimental, research and development applications has been reintroduced.ST-3000 incorporates diverse new technologies to enable higher precision torque measuring.

* With a maximum torque of 0.32 Nm, this mixer supports every level of mixing from low- to mid- and high-viscosity mixing.
* The easier-to-operate interactive LCD touch panel offers a digital display showing revolution speed and torque value.
* The (2 types of) representative standard form impellers and the 3 types of high-performance Super-Mix Series impellers, a total of five impellers, are attached to support all mixing requirements.
* Both the meter body and control box are lightweight and compact enabling you to take them anywhere.

New product

All Stainless Mixer

The All Stainless Mixer with sanitary specifications has been newly added to the Portable Mixer and Multi A Mixer. The newly installed specially developed stainless motor makes this model most suitable for applications in the pharmaceutical and food sectors.

The mixer body is made of stainless and incorporates a 0.2 kW stainless motor that has been specially developed for this mixer.(Motors other than 0.2 kW model are provided with SUS cover.)
Independent development has enabled us to cut the price of the mixer despite installation of the expensive stainless motor.
This mixer prevents commingling of rust and coating film, making it suitable for applications in the fine chemical, pharmaceutical and food sectors.

New productPatented

Satake Super-Mix Series HS100

This product is a next generation mixing-blade turbine for gas-liquid dispersion. It realizes high gas absorption performance (KLa) with a dramatically reduced power number.

(Power number compared with 6FT: Reduction of approximately 65%) Compared with the current turbine type, this product offers higher liquid fluidizing action and gas absorption capability.
It concentrates the flow by use of the lifting force of the low-power impeller and produces strong shearing and destructive actions through utilization of the pressure gradient and fluctuation in the discharge field.

Page Top